HomeProductsApplicationsServicesQualityAboutKnowledgeContact

Anode Active Material

Graphite anode material - ultra-high-power grade

Ultra-high-power graphite supports aggressive rate-capability and fast-charge screening where kinetics are more important than maximum volumetric energy density.

C

Product Details

Graphite anode material - ultra-high-power grade

Category
Anode Active Material
Availability
RFQ
Grade
Ultra-high-power graphite
Documents
SDS / COA / TDS

Typical Specification

  • Rate-performance grade; confirm target C-rate
  • Particle-size and coating package to be confirmed
  • Tap density typically lower than high-density energy grades
  • Moisture typically <=500 ppm

Specifications vary by grade and production lot. Confirm the applicable COA or TDS, sampling method, and acceptance limits before cell qualification.

Use Cases

  • Ultra-high-power graphite supports aggressive rate-capability and fast-charge screening where kinetics are more important than maximum volumetric energy density.
  • Requested materials can be quoted for R&D, pilot-scale qualification, or production-scale sourcing after grade, particle-size, documentation, and packaging requirements are confirmed.
  • Typical supporting documents may include SDS, COA, and TDS depending on supplier lot and requested specification.

Back to Battery Active Materials

Technical Selection Guide

How should Graphite anode material - ultra-high-power grade be evaluated?

Graphite anode material - ultra-high-power grade is a high-power graphite grade for lithium-ion anode development. Graphite performance depends on particle morphology, surface area, tap density, coating, first-cycle efficiency, rate capability, and compatibility with the selected electrolyte and formation protocol.

Why developers evaluate it

  • Graphite-electrolyte and SEI screening
  • Rate, fast-charge, and low-temperature cell development
  • Electrode-density and loading optimization

Development considerations

  • Confirm particle-size distribution and surface treatment
  • Monitor lithium-plating risk at high charge rate
  • Evaluate swelling, gas, EIS, and first-cycle loss

How to compare it

Compare graphite grades at matched areal capacity, porosity, electrolyte loading, and formation. A higher-power grade may improve kinetics but can trade against tap density, surface area, or initial efficiency.

Battery Active Materials Battery Applications Material Selection & Screening Support