Solid-State Sulfide
Li6PS5Cl, D50 4.5 +/- 1.5 um is a sulfide solid electrolyte powder for cold-press conductivity screening, composite cathode studies, and solid-state battery research.
Product Details
Li6PS5Cl, D50 4.5 +/- 1.5 um is a sulfide solid electrolyte powder for cold-press conductivity screening, composite cathode studies, and solid-state battery research.
Technical Selection Guide
Li6PS5Cl, D50 4.5 +/- 1.5 um is a sulfide solid electrolyte grade for pressed-pellet, composite-cathode, and lithium-metal interface research. Sulfide powders can provide high ionic conductivity and cold-press densification, but measured performance depends on particle-size distribution, pressure, density, moisture exposure, phase purity, and electrode contact.
This grade should be compared with other particle-size variants under identical pressing and EIS conditions. Listed parameters include Particle size: D50 4.5 +/- 1.5 um; Electronic: <= 10^-6 mS/cm; Ionic: >4 mS/cm, cold press. Higher conductivity in a pellet does not by itself establish better composite-electrode or full-cell performance.
Characterization
| Parameter | Specification / Result | Method |
|---|---|---|
| Appearance | Gray-white powder, uniform color, no visible agglomeration | Visual inspection |
| Particle size | D50 4.5 +/- 1.5 um | Laser particle-size analysis |
| Water | Lot-dependent; confirm by COA/TDS | Moisture analyzer |
| Ionic conductivity | >4 mS/cm, cold press | Electrochemical workstation, cold-pressed pellet |
| Electronic conductivity | <= 10^-6 mS/cm | Electrochemical workstation |
